PAINT SOLUTIONS
INSUFFICIENT LAYER THICKNESS

o Site Tools
>

Contact

>

Disclaimer

>

Search

o Solutions
>* Introduction
>* Adhesion Issues
>* Bio Degradation
>* Durability
>* Film Formation
>* Flexibility
>* Poor Substrates
>* Surface Irregularities
>Algal Growth
>Aluminium oxidation
>Bleeding
>Bleeding components from timber
>Blistering
>Blushing
>Chaulking of enamels
>Chaulking of wall paints
>Cracking
>Craquelé formation
>Craters
>Dirt collection
>Fish eyes
>Flaking
>Floating/Flooding
>Fungi
>Hazyness
>Holy days
>Insufficient adhesion
>Insufficient flexibility
>Insufficient hiding
>Insufficient Levelling
>Lifting
>Loss of gloss
>Peeling off of lacquers
>Peeling off of wall paints
>Pin holes
>Poor enemal hold out
>Sagging
>Salt deposit
>Saponification
>Soft paint film
>Steel corrosion
>Weathering of timber
>White Blooming
>Wrinkling
>Yellowing
>Zinc salts
Sikkens: the right color

Symptoms

Applied layer thickness is insufficient.

Cause

  • Wrong system composition
  • Poros substrate
  • Heavy textured substrate
  • Sharp edges
  • Influences of application method

Solution

Completely finish with a fitting opaque finish. If necessary, apply an additional layer.